you are here: Homepage →  MAX Products→  Descriptions

What are the Ascend products for.

This is a RDE compilation of many data sheets and product sheets available from public sources.

Pipeline 15

The Pipeline 15 is an easy-to-use external ISDN BRI terminal adapter that gives users high-speed access to a corporate headquarters or the Internet. It comes complete with a graphical user interface designed to get users up and running in less than 15 minutes. In addition, dual analog ports enable users to make phone calls or send faxes over a single ISDN BRI line.

  • Simplified installation and set-up
  • Integrated analog and digitacapabilities
  • Dynamic Bandwidth Allocation™ for maximum performance with minimacost
  • Support for WAN protocols: PPP, Multilink PPP (MP) and Multilink ProtocoPlus (MP+)

Pipeline 50

Because of its low cost and full range of feature, the Pipeline 50 has become the most popular ISDN remote access router on the market for connecting small office LANs and branch offices to corporate networks and the Internet. In a single, modem-sized box, the Pipeline 50 offers IP, IPX and Appletalk routing, remote manageability, standards-based security with SecureConnect Firewall and 40-bit IPSec Encryption, and support for unlimited users. Other important features of the Pipeline 50 include:

  • Inverse multiplexing of both ISDN B channels
  • Dynamic Bandwidth Allocation™
  • Built-in NT1 option
  • Support for simultaneous connections to different locations
  • Up to 512 Kbit/s throughput using compression
  • SecureConnect Firewalwith 40-bit IPSec Encryption
  • NavisAccess Network Management

Pipeline 50 and Pipeline 50 LS/DDS 56 Commonalties:

  • IP/IPX/Appletalk Routing
  • Ethernet (AUI or 10Base-T)
  • Console Port
  • Include apprpriate power adapter

Common Accessories include:

  • Product documentation
  • RJ-45 Ethernet crossover cable
  • DB-9 to DB-25 Adapter
  • RJ-11 to RJ-45 BRI cable

Pipeline 75

Telecommuters in need of integrated analog and digital capabilities and remote management features need to look no further than the Pipeline 75. This high-powered Ethernet-to-ISDN router allows users to step up to the latest in digital technology without leaving the analog world behind. The dual analog ports and bandwidth on demand technology enable users to simultaneously make analog calls and download large graphic files from the Internet or a corporate site. Using advanced remote management features, network managers can administer dial-up connections directly from a centrasite.

 

The Pipeline 75 also features:

  • Concurrent IP/IPX/Appletalk Routing
  • Standards-based MultiprotocoBridging
  • Comprehensive security with PAP/CHAP/Callback/Token Card Authentication
  • Built-in Ethernet interface
  • SecureConnect Firewalwith 40-bit IPSec Encryption

Pipeline 85

The Pipeline 85 is an Ethernet-to-ISDN bridge/router that builds on the well-known, tested and proven technology of the entire Pipeline series. It takes althe features and functionality of the award winning Pipeline 50 and includes the integrated Plain Old Telephone Service (POTS) ports found on the best-selling Pipeline 75, and adds an integrated 4-port 10Base-T hub. Now a smalor home office can have a single vendor, cost-effective solution for a smalnetwork of computers. Additionahubs can be "daisy-chained" through one of the Pipeline 85 Ethernet ports to allow for up to 1,024 users.

  • Integrated 4-Port 10Base-T hub: Up to (4) computers are directly supported –
  • MultiprotocoRouting: IP/IPX/Appletalk
  • Easy set-up and configuration: Point-and-click operation with the Java-based Pipeline Configurator
  • BCP Standard Bridging: Albridgeable protocols are supported in conjunction with Multiprotocol routing or as a bridge only
  • ISDN BRI WAN interface: High-speed, digitaand error-free connections across carrier services
  • Network Address Translation (NAT): Choose between one-in to many-out or one-to-one
  • TCP/IP assignment via a DHCP server
  • Dynamic Host Configuration Protoco(DHCP) server spoofing
  • Integrated SecureConnect Firewalwith 40-bit IPSec Encryption

Pipeline 130

The Pipeline 130 is a dual-port, multiprotocol remote access router that comes with so much built-in functionality that it’s total cost of ownership is the lowest in the industry. Because the Pipeline 130 supports both dial-up and dedicated services, you can use it today to set up ISDN BRI connections, then upgrade to Frame Relay or Leased Lines at speeds up to T1 as your network needs change and grow. It's so flexible, it's the only remote access router you’ll ever need to connect your company headquarters to the Internet or your remote offices to the corporate LAN.

 

Built-in capabilities include:

  • Support for ISDN BRI, Switched 56, Frame Relay and Leased Lines
  • Backup for mission critical applications
  • MultiprotocoRouting and Bridging
  • Bandwidth on demand, for low-cost, high-performance computing across the WAN

Common features include:

  • IP/IPX/Appletalk Routing
  • Ethernet (AUI or 10Base-T)
  • STAC 4:1 Data Compression (Over BRI) with the exception of P130-LS-562N
  • Console Port
  • Integrated SecureConnect Firewall

Pipeline 220

The Pipeline 220 offers open WAN-to-LAN access and comprehensive security options in a single, compact and affordable unit. It is ideal for corporations and medium to large companies who want to permit the outside world access to their Web servers, ftp sites and other "public" resources while maintaining a high leveof security for their enterprise network. The Pipeline 220 features an unchannelized T1/FT1 (or E1) or high-speed Serial V.35 (with X.21 & RS-449 support) WAN interface and dual 10Base-T Ethernet LAN ports that can be protected by a variety of software-configured security options.

  • Integrated T1/FT1 or E1/FE1 and V.35 interfaces:
  • Software configure either T1 (E1) or high-speed serial
  • Integrated SecureConnect Firewall: A dynamic "stateful inspection" firewall
  • VPN Tunneling: Tunnethrough the Internet securely with ATMP
  • MultiprotocoRouting: IP/IPX/Appletalk
  • BCP standard Bridging:
  • All bridgeable protocols are supported in conjunction with multiprotocol routing or as a bridge only
  • dual Ethernet LAN interfaces:
  • dual integrated 10Base-T Ethernet ports allow for varying hardware and software configurations
  • Network Address Translation (NAT):
  • Choose between one-in to many-out or one-to-one TCP/IP assignment
  • Dynamic Host Configuration Protoco(DHCP) server spoofing

SuperPipe 95

The SuperPipe™ 95 provides a complete multiservice access solution for corporate telecommuters, remote offices and smaller businesses that want advanced networking features without sacrificing performance, network security or their budget. Included with every SuperPipe 95 are advanced security features as welas LAN, Phone and Video interface ports that are either expensive options or unavailable on other ISDN routers.

 

Integrated support for two ISDN BRI circuits (for a totaof 4 B Channels) allows cost-effective, incremental additions to WAN access speed as an office’s communications needs increase. Two RJ11 phone jacks support standard phones and fax machines, and the local ISDN S/T port provides ISDN telephone or videoconference equipment connectivity.

  • Integrated Data, Voice And Video Support For Cost-Effective Network Integration
  • MultiprotocoBridging And Routing Supports Internet Access Or Corporate Network Connectivity
  • High-Performance RISC Processor For High Throughput And Mission Critical Application Support
  • dual (2) ISDN BRI Support, With AO/DI
  • Robust, Enterprise-LeveSecureConnect Dynamic FirewalIncluded At No Extra Cost
  • Integrated IPSec virtual Private Networking (VPN) Support Included At No Extra Cost
  • Integrated Support For 56-Bit DES Encryption (3DES Optional) For End-To-End Data Security
  • Two Analog RJ11 Phone Ports With Support For SupplementaCalling Features
  • Local S/T ISDN BRI Interface For A Direct Connection To A Desktop Video CODEC Or ISDN
  • Telephone
  • Simple NavisConnect Web-Based Configuration Utility, Comprehensive SNMP Management
  • 10/100 Autosensing Ethernet For Easy Migration To Fast Ethernet Networks

SuperPipe 155

The SuperPipe™ 155 remote access router provides a complete mutiservice access solution for organizations that want a simple yet complete solution to support their network requirements, both now and in the future. By incorporating everything that is needed for highly secure and scalable Internet access the SuperPipe155 provides a solution without hidden, additional costs when needs change or network speed requirements increase. Highly-secure firewall and Virtual Private Networking (VPN) software is included with every SuperPipe 155, and a range of interface alternatives, including integrated ISDN, T1/FT1 (or E1/FE1) or high speed V.35 (with X.21) WAN ports and dual analog phone jacks, provide the connectivity choices that businesses need.

  • Multiprotocol Bridging and Routing supports Internet Access or Private Network connectivity
  • T1/E1/V.35 port with integrated CSU/DSU, Frame Relay support for high-speed Dedicated Bandwidth
  • dual (2) ISDN BRI ports for on-demand bandwidth and T1/E1 backup
  • High-performance RISC processor for high throughput and mission critical application support
  • Robust, Enterprise-level SecureConnect dynamic firewall included at no extra cost
  • Integrated IPSec virtual Private Networking (VPN) support included at no extra cost
  • Integrated Support for 56-bit DES encryption (3DES Optional) for end-to-end data security
  • dual Analog RJ11 phone ports, and locaISDN S/T Interface for ISDN phones and Video
  • 10/100 autosensing Ethernet for easy migration to Fast Ethernet networks
  • Simple NavisConnect GUI configuration Utility, Comprehensive SNMP management

MAX 800

The MAX 800 is a WAN Access Switch with (8) PCMCIA (PC Card) Type II slots or (4) Type III slots. The standard MAX 800 chassis includes the following hardware:

  • (8) PCMCIA (PC Card) Type II slots
  • (1) Ethernet port (AUI or 10Base-T)
  • (1) RS-232 console port
  • The standard MAX 800 chassis includes the following software:
  • Intragy Software: Bridging, Multiprotocol Routing, (IP, IPX and Appletalk), Appletalk Remote Access
  • and a 5-User license pack of IntragyAccess Software
  • GlobaDigitaAccess: ISDN BRI signaling and digitaaccess for up to 8 channels
  • OptionaSoftware for the MAX 800 includes:
  • virtual Private Remote Networking
  • SecureConnect Firewall
  • NavisAccess Management Software Option

MAX 1800

The MAX 1800 is a WAN Access Switch that contains the hardware for 8 BRI interfaces or it is limited to 4 BRI interfaces depending on the model. Both the (4) and (8) BRI port models have (2) available slots for MAX slot cards. The MAX 1800 is designed for customers who do not have access to T1/E1 lines or only need a limited number of remote access channels. The chassis can handle up to (16) channels of either analog or digital connections, and offers the same software functionality as the rest of the MAX product line.

 

The standard MAX 1800 chassis includes the following hardware:

  • (8) BRI interfaces, available in either S/T or U interface configurations
  • (1) Ethernet (AUI or 10Base-T)
  • (1) Serial V.35 interface
  • (1) RS-232 console port (DB-9)

The standard MAX 1800 chassis includes the following software:

  • Global Digital Access for the MAX 1800 includes ISDN BRI signaling software worldwide Digital Call
  • support (Hybrid Access) for up to (8) or (16) channels depending on model, and Frame Relay.
  • Intragy software for corporate Multiprotocol environments
  • Provides support for RADIUS (Remote Authentication Dial-In User Service)
  • NavisConnect Configuration Utility

Optional Software for the MAX 1800 includes:

  • virtual Private Remote Networking
  • SecureConnect Firewall
  • NavisAccess Software Option (Advanced Management Software)
  • If unspecified, North American units will ship with the standard BRI software load and International
  • units wilship with the standard International BRI software load.

MAX 2000

The MAX 2000 is a WAN Access Switch that contains either (1) T1 port or (1) E1 port depending on the model. You cannot change this in the field. Both the (1) T1 and (1) E1 models have (2) available slots for MAX slot cards. The MAX 2000 is designed for customers who have access to T1 or E1 lines and only need to support 24 (T1) or 30 (E1) simultaneous remote access channels. Note that the MAX 2000 E1 model is limited to a maximum of 24 modems. The MAX 2000 runs the latest versions of Lucent’s True Access Operating System (TAOS) up to 7.xxx .

The standard MAX 2000 chassis includes the following hardware:

  • (1) T1/E1 interface with integrated CSU
  • (1) Ethernet (AUI or 10Base-T)
  • (1) Serial V.35 interface
  • (1) RS-232 console port (DB-9)
  • (1) Alarm Relay port

The standard MAX 2000 chassis includes the following software:

  • Global Digital Access for the MAX 2000 includes ISDN PRI Signaling, Digital Call support (Hybrid
  • Access) for up to (24) channels on T1 and (30) channels on E1, and Frame Relay.
  • Support for RADIUS (Remote Authentication Dial-In User Service)
  • NavisConnect Configuration Utility

Optional Software for the MAX 2000 includes:

  • Virtual Private Remote Networking
  • SecureConnect Firewall
  • NavisAccess Software Option (Advanced Management Software)
  • Intragy software for corporate Multiprotocol environments
  • Secondary CSU Software Option

MAX 2012/2024

The MAX 2012 and 2024 are WAN Access Switches that contain either (1) T1 port or (1) E1 port, and either (12) or (24) Series56 Digital Modems depending on the model. The MAX 2012 has (1) available slot and the MAX 2024 has no available slots for hardware expansion. The MAX 2012 and 2024 are designed for customers who have access to T1 or E1 lines and only need to support 24 (T1) or 30 (E1) simultaneous remote access channels. Note that the MAX 2000 E1 modeis limited to a maximum of 24 modems. The MAX 2012 and 2024 run the latest versions of Lucent’s True Access Operating System (TAOS).

The standard MAX 2012/2024 system includes the following hardware:

  • (1) (MAX 2012) or (2) (MAX 2024) Series56 12 Digital Modem slot card(s)
  • (1) T1/E1 interfaces with integrated CSU
  • (1) Ethernet (AUI or 10Base-T)
  • (1) Serial V.35 interface
  • (1) RS-232 Console Port (DB-9)
  • (1) Alarm Relay Port

The standard MAX 2012/2024 includes the following software:

  • Global Digital Access for the MAX 2000 includes ISDN PRI signaling, Digital Call support (Hybrid
  • Access) for up to (24) channels on T1 and (30) on E1, and Frame Relay.
  • SecureConnect Firewall
  • Support for RADIUS (Remote Authentication Dial-In User Server)
  • NavisConnect Configuration Utility
  • Intragy software for corporate Multiprotocol environments

OptionaSoftware for the MAX 2012/2024 Plus includes:

  • virtual Private Remote Networking
  • NavisAccess Software Option (Advanced Management Software)
  • Secondary CSU Software for 2012

Note: The MAX 2024 is a fully populated system.

MAX 3000

The MAX 3000 is Lucent's latest next generation low- to mid-range remote access concentrator (RAC). Designed for small and medium-sized ISP POPs and all-sized enterprises, the MAX 3000 offers the ease of use, manageability, and breadth of features that have become hallmarks of access products from Lucent. Taking advantage of the latest RISC processor technology, the MAX 3000 boasts a state-of-the-art multiprocessor design. It breaks new ground in hardware design with its high density Digital modems, removable system tray, field upgradable synchronous DRAM, Flash RAM and compression/encryption co-processor.

The standard MAX 3000 chassis includes the following hardware:

  • - (2) T1/E1/PRI interfaces with integrated CSUs "OR" (and not "and") !
  • - (6) ISDN BRI interfaces (U and ST versions available)
  • - (1) T1 Drop & Insert interface (T1 modeonly)
  • - (l) Ethernet 10/100Base-T fulduplex, autosensing
  • - (l) V.35 Serial Port
  • - (l) RS-232 Serial Console Port
  • - 8MB Flash, 16MB SDRAM (DIMM based)
  • - (2) MAX card slots
  • - (l) AC Power Supply (230 watts maximum output, 150 watts nominal)

The standard MAX 3000 chassis includes the following software:

  • - T1 support with D4 framing
  • - X.25 PAD, X.25 over B-channel
  • - IP Routing (RIP, RIP2, OSPF, IGMP Multicast Forwarding)
  • - PPP Remote Access (PPP, SLIP, C-SLIP, Async PPP, Sync PPP)
  • - Bandwidth Management Protocols
  • - MAX Stack that lets multiple MAX switches be connected together via their Ethernet port and distributes multilink call bonding among all MAXen in the stack creating a single virtual concentrator

Optionasoftware for the MAX 3000 includes:

  • - Global Digital Access
  • - Intragy software for corporate multiprotocol environments
  • - virtual Private Remote Networking tunneling support for the MAX
  • - SecureConnect Firewall
  • - NavisAccess Software Option (Advanced Management Software)

MAX 4000 Series

The MAX 4000 is a WAN Access Switch that contains either (4) T1 ports or (4) E1 ports depending on the model. The MAX 4000 has (6) available slots for hardware expansion. The MAX 4000 is designed for customers who have access to T1 or E1 lines and only need to support from (24) to (72) simultaneous remote access channels per chassis. Multiple MAX products can be stacked together to provide hundreds of access ports. The MAX 4000 runs Lucent’s True Access OS version 7.0 and earlier.

 

(Note: The MAX 4000 is End of Sales since 2001 and in Software Maintenance Status. TAOS 7.0 is the last version to be released for the MAX 4000 because of its 2 MB internal fixed flash).

The standard MAX 4000 Series chassis includes the following hardware:

  • (2) (MAX 4002) or (4) (MAX 4000 and 4004) T1/E1 interfaces with integrated CSUs
  • (1) Ethernet (AUI or 10Base-T)
  • (1) Serial V.35 interface
  • (1) RS-232 Console Port (DB-9)
  • (1) Alarm Relay Port

The standard MAX 4000 Series chassis includes the following software:

  • Provides support for RADIUS (Remote Authentication Dial-In User Service)
  • NavisConnect Configuration Utility

Optional Software for the MAX 4000 Series includes:

  • Global Digital Access for the MAX 4000 includes ISDN PRI signaling, Digital Call support (Hybrid
  • Access) for up to (48) channels on T1 and (60) on E1, and Frame Relay.
  • virtual Private Remote Networking
  • SecureConnect Firewall
  • NavisAccess Software Option (Advanced Management Software)
  • Intragy software for corporate Multiprotocol environments

MAX 40XX Systems

The MAX 40XX Systems are WAN Access Switches as bundled systems with modem cards and sofware that provide a complete remote access system. The MAX 40XX Systems contain either (2) T1 ports (MAX 4024 and 4048) or (2) E1 ports (MAX 4030 and MAX 4060). These MAX 40XX Systems do NOT accept additional MAX slot cards for hardware expansion. The MAX 40XX Systems are designed for customers who have access to T1 or E1 lines and only need to support from (24) to (60) simultaneous remote access channels per chassis. Multiple MAX products can be stacked together to provide hundreds of access ports.

 

All other features see the MAX 4000 above.

MAX 6000

The MAX 6000 is a next generation WAN access switch. It provides Internet Service Providers, carriers, and corporate customers the increased performance and expandability needed for both current and future dial access services. The MAX 6000 uses the feature-rich True Access Operating System (TAOS) software and MAX slot cards that have been proven on the market leading MAX product line. This compatibility with existing MAX systems protects customer investment while providing the performance needed to run next generation services like MultiVoice. The MAX 6000 is simply the fastest, most versatile, scalable, and manageable product for routing remote access calls to the Internet or corporate intranet.

The standard MAX 6000 chassis includes the following hardware:

  • (4) T1 or E1 (PRI) interfaces with integrated CSUs
  • Ethernet 10/100Base-T fulduplex, autosensing
  • V.35 Serial Port
  • RS-232 Serial Console Port
  • Flash Memory Expansion PC Card Slot
  • DRAM Expansion JEDEC Card Slot
  • Alarm Relay Port
  • up to (6) MAX card slots
  • AC Power Supply (400 watts maximum output, 225 watts nominal)

The standard MAX 6000 chassis includes the following software:

  • T1 support with D4 framing
  • X.25 PAD, X.25 over B-channel
  • IP Routing (RIP, RIP2, OSPF, IGMP Multicast Forwarding)
  • PPP Remote Access (PPP, SLIP, C-SLIP, Async PPP, Sync PPP)
  • Bandwidth Management Protocols
  • Data Compression
  • MAX Stack that lets multiple MAX switches be connected together via their Ethernet port and distributes multilink calbonding among alMAXen in the stack creating a single virtual concentrator

Optional software for the MAX 6000 includes:

  • Global Digital Access
  • Intragy software for corporate Multiprotocol environments
  • virtual Private Remote Networking tunneling support for the MAX
  • SecureConnect Firewall
  • NavisAccess Software Option (Advanced Management Software)

Note: The 32 MByte DRAM JEDEC Card (MX60-DRAM-32MB) for the MAX 6000 has not been made available because it provides no benefit to the customer at this time. Current and near future TAOS software loads fit well within the current 16 MB of DRAM standard on the MAX 6000. We plan to sell the JEDEC Card only when larger future releases of TAOS software can benefit from an increase in DRAM.

MAX TNT

The MAX TNT represents the latest technology in carrier-class WAN Access Switch design. Its innovative, high-density, modular architecture addresses the needs of carriers, corporations, and Internet Service Providers who want maximum performance for dial-up and Digital access concentration in an extremely cost-effective and flexible platform. The MAX TNT supports up to 960 concurrent calls to a central site or Mega POP over a dynamic mix of access lines such as analog, ISDN, T1/E1, DS3, and Frame Relay. The system is available with a wide range of LAN and WAN interfaces and features MultiDSP and Series56 II and III Digital Modem Modules. The MAX TNT has been designed to provide efficient, reliable service and is available with redundant AC or DC power supplies, expandable FLASH and DRAM memory as well as hot-swappable expansion modules. The system also features an industry-leading, multiprocessor architecture with a multi-bus, high-speed backplane designed for outstanding performance under the heaviest conditions.

 

Any MAX TNT slot card product code ending in "-C" (can-less) indicates that the slot card is being manufactured without a metahousing (can) so that they may be installed in both the MAX TNT and the APX 8000 chassis. Many pre-existing and most new TNT slot cards will have this manufacturing change over time. These new slot cards will specifically meet the airflow requirements of the APX 8000 chassis. No changes in functionality are incurred for any TNT slot cards undergoing this manufacturing change. Re-certification is not required, but is at the customer's discretion, due to the change in ModeNumber and CLEI code. Many MAX TNT slot cards existing in the field can be retrofitted for use in the APX 8000.

APX 8000

The APX 8000 is Lucent's carrier-class access switch optimized for seamless integration of dial/data (modem or ISDN), VoIP, Fax-over-IP and VPN services.

Note regarding all APX 8000 slot card modenumbers ending in -C: The "-C" simply indicates that the slot card is being manufactured without the metahousing so they can be installed in both the APX 8000 and the MAX TNT chassis. Only canless versions of cards can be installed in the APX 8000. Many cards currently in the field can be retrofitted for use in the APX 8000.

  • Versatile multiservice architecture
  • Industry’s highest densities
  • Full-function VoIP solution
  • Toll-quality voice (G.711, G.729, RT-24)
  • Carrier class reliability
  • High performance switching
  • Market proven operating system
  • Broad interface support
  • Advanced management and provisioning
  • Investment protection

MultiDSL: Stinger

The Lucent Technologies Stinger addresses the needs of carriers implementing DSL networks, offering both high performance and high capacity traffic aggregation. On the subscriber side, Stinger supports both ATM and Frame Relay protocols for communication with customer premises equipment (CPE). On the network side, the trunk protocol is ATM. The Lucent Stinger consists of a chassis populated with four different types of plug-in modules:

  • 1. Switching and ControModule (CM) installed in the front slots
  • 2. Line Interface Module (LIM) installed in the remaining 14 front slots
  • 3. Trunk Module installed in the rear centrapair of slots
  • 4. Line Protection Module (LPM) installed in the remaining 14 rear slots

Alof these modules plug into a mid-plane circuit board. Traffic is transmitted / received on DSL lines attached to the LPM modules at the rear of the Stinger. Each LPM provides signal coupling to its corresponding LIM, with protective electrical isolation between the line and LIM.

 

Line Interface Modules (LIM)

Line Interface Modules (LIMs) provide the link layer protocol support (ATM or Frame Relay) for diverse DSL interfaces. Currently, two such modules have been implemented for Stinger:

  • 48-port SDSL
  • 12-port ADS(DMT Fulor G.Lite)

Trunk Module (TM) - Two types of Trunk Module (TM) are available for Stinger:

  • OC-3c for SONET single-mode or multi-mode fiber lines
  • DS-3 for coax lines

Line Protection Module (LPM)

The common purpose of all Line Protection Modules is to provide isolation and surge protection between incoming lines and the Line Interface Modules.

 

Text fixed up to here ==================================================

Multi DSL: DSLTNT

The DSLTNT is a Multi-Service xDSconcentrator featuring ultra-high port density, low power consumption, hot-swappable cards, redundant power supplies and the flexibility to offer a wide range of xDSservices, including IDSL, SDSL, RADSL-CAP and RADSL-DMT.

  • 16-Slot, 14" chassis for MultiDSline cards and network interface cards
  • Highest port density of IDSL, SDSand RADSports per 7-Foot rack
  • Wide range of network interfaces includes T1/E1 PRI, 100 Base-T, 10 Base-T, DS3 Frame Relay, DS3 ATM, OC-3c/STM-1 ATM
  • Seamless integration into existing authentication and billing infrastructure (PAP, CHAP, RADIUS, TACACS+, NavisRadius, Token cards, etc.)

MultiDSL: DSLMAX 20

MultiDSimplements DStechnologies immediately in both CentraOffice Equipment (COE) and Customer Premises Equipment (CPE). COE includes DSLMAX 20 as a low-end, compact DSaccess concentrator. Chassis and appropriate slot cards for line and trunk interfaces are offered. CPE needs are addressed by the DSLPipe family or compatible partner CPE products, (Xpeed, XAVI, etc.)

MultiDSL: DSLTERMINATOR

MultiDSenables implementation of end-to-end DSTechnologies, (CPE-COE, edge management device). DSLTERMINATOR 100 is an edge device capable of PVC/PPP aggregation, termination and subscriber management.

E-MAX Access Routers

Based on the DSMAX 20, the EMAX access router is a cost-effective, multi-port E1 access solution. It is targeted at Internet service providers and CLECs that need a compact E1 aggregation router within their POP data centers. The EMAX access router is available in 4-port, 8-port, and 16-port E1 versions. It leverages the rich Layer-3 routing features and functionality of the Lucent MAX platform code base (TAOS).

 

The EMAX configuration is designed for low cost and high functionality, providing integrated Layer-2 and 3 functionality in a single compact unit. Because it occupies only 1 U of standard telco rack space, up to 42 units can be housed in a single 7-foot rack, for a density of up to 672 E1 ports. Its compatibility with almajor network protocols makes the EMAX router an ideal solution, regardless of the router equipment currently in place at the end-user premises.

Multi DSL: DSLPipe

DSLPipe products are offered as the CPE for other DStechnologies or as a standalone CPE/COE connecting two networks together. These include the DSLPipe-HST (SDSL), DSLPipe-C (RADSL-CAP) and DSLPipe-D (RADSL-DMT). Frame Relay is generally used for data transmission. PPP can also be used, if the DSService is offered by an ISP that requires PPP. The Cellpipe 50A CPE/ATU-R product uses ATM-over-ADSL-DMT technology from Alcatel Micro Electronics providing compatibility with Alcatel ASLAM systems. The product leverages all of the Pipeline's features and includes support for PPP-over-ATM and RFC1483 for routing and bridging.

The DSLPipe CAP/DMT/SDSprovides:

  • (1) Console Port for a VT-100 terminaconnection
  • (1) Ethernet Port
  • (1) DSCPE Port (RADSL-CAP or RADSL-DMT or SDSL)

The RADSL-CAP 1 Port COE provides:

  • (1) Console Port for a VT-100 terminaconnection
  • (1) Ethernet Port
  • (1) DSCOE Port (RADSL-CAP)

The DSLPipe-HST provides:

  • (1) Console Port for a VT-100 terminaconnection
  • (4) port Ethernet Hub and one SDS2.3M CPE Port

The DSLPipe-HSTIE provides:

  • (1) Console Port for VT-100 terminaconnection
  • (1) Ethernet Port
  • (1) SDS2.3M CPE Port

The Cellpipe-50A provides:

  • (1) Console Port for VT-100 terminaconnection
  • (1) Ethernet Port
  • (1) ATM-over-ADSCPE Port

MultiDSL: Third Party Compatible CPEs

Third party compatible CPEs are offered as low cost alternatives to customers requiring low cost, low end CPE devices to connect to Lucent MultiDSCOE platforms.

Multi DSL: Pot Splitters

Splitters separate the POTS line from the DSline. Generally it operates in pairs – one at the CO and the other at the customer premises. The CPE with DSline and the analog telephone wilbe connected to the Splitter at the customer site. The Splitter at the CO splits the signaagain and connects the POTS signal to the PSTN switch, and it also connects the DSline to the DSLTNT or Stinger.

IPSS 5000

The IP Service Switch is the first in a new class of product that occupies the service layer in the new Public IP Network. The IPSS 5000 enables the widespread deployment of network-based IP Virtual Private Networks (VPNs) and other high margin, value-added IP services. The IPSS 5000 is based on Spring Tides's highly scalable Pipelined PacketFlow™ architecture, that integrates multiple functions in a single carrier class platform. The IPSS 5000 replaces costly multi-device solutions, eliminates the need for extensive, customized CPE devices, and reduces the overalcost of IP service delivery and operations.

cvMAX 100

The cvMAX 100 is a compact, high-performance Layer-3 device that terminates L2TP/ATMP sessions. It gives service providers and carriers a cost-effective method of aggregating and terminating high numbers of virtual circuits sessions. The cvMAX 100 features integrated Layer-3 capabilities and subscriber management features that enable service providers to perform routing, authentication, billing and service selection capabilities. The cvMAX 100 is primarily targeted at service providers for cost-effective sessions termination and service management but can also be used by carriers and transport providers for sessions aggregation termination and routing services. No competing product offers so much speed, density and versatility at such an affordable price.

Multiband MAX

The Multiband MAX is a cost effective solution for applications requiring inverse multiplexing capabilities and gives companies an easy growth path to more robust remote networking applications. By adding remote access options, the Multiband MAX becomes a full-feature MAX WAN Access Switch. As such, it offers an excellent entry-level product for companies who are considering telecommuting applications but are not ready to implement a remote networking program. A major difference in the offering of the Multiband MAX product family versus the standard MAX family is the prebundling of software designed for the multimedia product group environment and enhanced management features supporting Telnet, SNMP, and NavisAccess. The Multiband MAX family is a group of specially configured, cost-effective MAX products with inverse multiplexing and WAN network features optimized for videoconferencing and backup/overflow. It gives the customer unparalleled price/performance with platforms structured for flexible growth. The Multiband MAX family enhances and extends current corporate backbone switched and leased networks by providing and managing bandwidth on demand for multiple applications.

Multiband Plus

The Multiband Plus is designed for users who need high-speed bandwidth on demand to support multiple applications such as videoconferencing, electronic imaging, disaster recovery, and private network backup and overflow. Use it to allocate the bandwidth of two T1/PRIs to a single application such as a video bridge, or divide the bandwidth any way you want between up to four separate applications, so no bandwidth is wasted.

  • Industry-standard inverse multiplexing
  • Globaconnectivity
  • Locaand remote configuration and diagnostics
  • Password security
  • Identifies faulty leased lines and automatically establishes backup connections
  • Drop & Insert capability can pass unused channels to a PBX or other device
  • Handles both dedicated and dial-up bandwidth

Multiband VSX

Setting up low-cost, high-speed videoconferences is simple with the Multiband VSX T1/PRI inverse multiplexer. Connected to a single video codec, the Multiband VSX T1/PRI can establish group or desktop videoconferences at speeds ranging from 112 Kbit/s up to a fulT1. Users can transmit voice traffic from their PBX along with video traffic over the same T1 line with optionaDrop & Insert module. The Multiband VSX BRI is a low-cost, scalable inverse multiplexer that lets companies extend their videoconferencing networks to branch offices over ISDN BRI lines. The Multiband VSX BRI today may set up videoconferences over a single BRI line at 128 Kbit/s. As videoconferencing needs grow, add an expansion module that provides up to 512 Kbit/s bandwidth over (4) BRI lines. In a single notebook-sized unit that fits neatly in any room-system rack, the Multiband VSX provides these important features:

  • Industry-leading inverse multiplexing
  • Integrated CSU
  • Interoperability with other vendors' video equipment
  • Globaconnectivity
  • Locaand remote configuration and diagnostics Password security

Multiband RPM

The Multiband RPM is a self-contained port extension device that allows Multiband products to communicate over regular copper wire and existing data jacks instead of speciawiring.

  • Extends Multiband functionality up to 3,400 feet
  • Works with standard unshielded twisted pair cabling
  • Two applications at 768 kbps; single application at 1.5 Mbps
  • Remote management via optionapalmtop controunit

MultiVoice

The MultiVoice product solutions consist of gateways and gatekeepers that allow ordinary telephones to connect to other telephones using a public or private packet network. This is accomplished using a standards based Voice-over-IP (VoIP) gateway that allows telephone calls to be transmitted across a packet network. The VoIP gateways are known as the MultiVoice Gateway for the MAX and the MultiVoice Gateway for them MAX TNT. The VoIP Gatekeeper is the MultiVoice Access Manager. It is a server software product for providing access and authentication management for the gateways. The gateways support the ITU-T H.323 standard for transmitting voice over IP networks. When a voice call is received at a near end MultiVoice Gateway, the voice signais packetized, compressed, and trasmitted over the packet network using standard protocols and voice compression technologies. At the far-end gateway the process is reversed, and the calis delivered over remote PSTN to its intended destination.

The MultiVoice for the MAX product components include:

  • MultiVoice Gateway for the MAX
  • MultiVoice Access Manager

The MultiVoice for the TNT product components include:

  • MultiVoice Gateway for the TNT
  • MultiVoice Access Manager

Signaling Note: ISDN is NOT included with the MultiVoice for the MAX Gateway 6000 bundles and must be ordered separately.

 

The International supported MultiVoice software options are:

MultiVoice for the MAX:

  • MX60-SO-ISDN-INS (ISDN INS signaling MAX6000 – T1 only),
  • MX60-SP-HA-IXR2 (Global Digital Access: R2 and IX - E1 only),
  • MX60-SO-ISDN-IX (ISDN IX signaling – E1 only),
  • MX60-SO-R2 (R2 signaling for Max 6000 – E1 only)

Intragy

IntragyCentrais a network access solution for the MAX and the MAX TNT. It enables employees located at the corporate site and around the world equaaccess to files and databases on the enterprise network. Multiprotocol Routing functionality gives both remote and LAN-based users seamless access to IPX and Appletalk services.

  • Ethernet Bridging delivers transparent connectivity
  • DeskDiacapability eliminates the need for stand-alone modems
  • IntragyAccess is a tightly integrated set of TCP/IP desktop client applications for enterprise network
  • access. It enables managers to easily outfit end-users with applications for mission-Critical network tasks.
  • Complete set of functionality for enterprise desktop communications with terminaemulation,
  • electronic messaging, DeskDial, locaand remote file transfer and sharing, network printing and remote access.
  • Support for popular desktop platforms, including Windows 3.1, Windows 95, NT 4.0, and Macintosh OS.
  • Simple to use: easy and flexible installation; consolidated configuration
  • Common interface across alplatforms eases learning curve

NavisAccess

NavisAccess 5.0 is the next-generation access management platform from Lucent Technologies. It provides service level management for diaservices, as welas DSand VoIP.Because NavisAccess 5.0 is a multi-machine system, customers may need to instalit on more than one server, as welas on any number of workstations. For multi-server farms, customers must purchase one Primary Server, plus however many Secondary Servers they wilneed for their deployment. Workstation licenses are also sold separately, as are CNM clients.Note that a Primary Server may be installed as a standalone system. In alcases, customers must have a Primary Server. Secondary Servers wilnot work without a Primary Server installed.Licensed users of NavisAccess 4.3 may purchase the upgrade version on NavisAccess 5.0. However, because version 4.3 is a single-server system, upgrade pricing is available only for the Primary Server. Note that for NavisAccess 5.0, upgrade pricing is not discountable.NavisAccess Service Modules require only one copy per server farm. For example, if a customer installed NavisAccess on three Sun servers and wanted the DSmanagement add-on, they would nee to purchase:

 

(1) NavisAccess Primary Server for Solaris (for the first Sun machine)

 

(2) NavisAccess Secondary Servers for Solaris (for the second and third Sun machines)

 

(1) NavisAccess DSadd-on service module (installed on the Primary Server)

 

The following products and services are fully supported only by NavisAccess 5.0:

 

xDSproducts, including Stinger, DSLTNT, DSMAX 20, and Terminator 100 APX 8000 VoIP services on MAX, MAX TNT and APX 8000

 

For release 4.3, NavisAccess is sold in two components. The NavisAccess Suite provides fulproduct functionality for one server installation. The Suite provides a license for one user only. For additional simultaneous users, separate NavisAccess Clients are required. The Client platform must correspond to the Suite platform (NT Suite with NT Client, etc.).

 

NOTE: Management of certain devices also require purchase of a Software Option for each device to be managed. Software Options are sold on a per-device basis. Software Options are delivered by a hash-code mechanism.

SecureConnect Firewall

SecureConnect Firewalincludes award winning and ICSA certified Firewaltechnology and the SecureConnect Manager, a user-friendly yet powerfupoint-and-click Windows-based graphicauser’s interface (GUI) that allows network managers or end-users to configure the comprehensive array of Firewaland IPSec options. Users simply click on menu items to configure SecureConnect Firewall for authorizing traffic by network application, address, host name, protocol, source and destination ports, session state, and traffic direction.

 

Although the security provisions are quite comprehensive, the measures are totally transparent to legitimate users. SecureConnect Firewalalso has a surveillance feature that logs and reports attempted security breaches for potentiaaction by network managers.SecureConnect Firewalsupplements other MAX and Pipeline security features that provide user authentication, callback, calling line ID (CLID) and Remote Authentication Dial-In User Services (RADIUS) management, along with support for many third party security add-ons. It is available as a cost-effective, software-only upgrade for MAX WAN access switches. The SecureConnect Firewall with 40-bit IPSec Encryption is included as a free standard shipping feature of the Pipeline 50, 75, 85, 130, and 220. Upgrades for optional levels of IPSec Encryption are noted below. Upgrades for IPSec include 56-bit and 128-bit (3DES) and are available only where allowed by locaimport/export laws. No encryption of any kind may be sold to customers in the following countries: Cuba, Iran, Iraq, Libya, North Korea, Sudan, or Syria.

SecureConnect Firewaloffers severaimportant advantages:

  • Cost effective integration with the network access equipment eliminates the need to purchase, install and manage a separate security system
  • Dynamic Firewaltechnology – state-of-the-art in Internet security
  • Stops unwanted access at the perimeter of the Wide Area Network (WAN)
  • Completely transparent to authorized users
  • SecureConnect Manager and enhanced support for RADIUS minimize administrative tasks
  • Works together with other security provisions for maximum protection
  • 40-bit IPSec Data Encryption Standard (DES) encryption. 56-bit & 128-bit (3DES) upgrades optional
  • Comprehensive documentation covering alaspects of both Firewaland IPSec functionality

NavisRadius

The NavisRadius 3.0 product line consists of two products: NavisRadius Base Platform Edition and NavisRadius Service Provider Edition. These are referred to, respectively, as NavisRadius-BP and NavisRadius-SP.

 

 

Nach oben

Goto to Homepage - © 2003/2012 - all Copyrights by RDE Consult - Wiesbaden / Germany - PLEASE NOTICE : THESE PAGES ARE RETIRED !! goto Imprint